If you’re a proud owner of a Honda Civic, you know that regular maintenance is essential for keeping your car running smoothly. One aspect of maintenance that you may not be familiar with is the torque specs for your Civic’s wheel lugs.
In this article, we’ll dive into everything you need to know about Honda Civic wheel lug torque specs.
Table of Contents
What are wheel lug torque specs?
Before we get into the specifics of the Honda Civic’s wheel lug torque specs, let’s take a moment to talk about what wheel lug torque specs actually are. When you attach a wheel to your car, you use lug nuts to secure it in place.
The torque spec is the amount of force required to tighten the lug nuts to the manufacturer’s recommended level.
Over-tightening or under-tightening your lug nuts can lead to a host of problems, so it’s essential to follow the torque specs for your car.
What are the Honda Civic wheel lug torque specs?
Now that you know what wheel lug torque specs are let’s talk about the specifics for the Honda Civic.
The recommended torque for Honda Civic wheel lugs is 80-100 lb-ft (108-135 Nm). It’s important to note that this torque spec is for the standard 16-inch wheels that come with most Civics.
If you have aftermarket wheels, you’ll need to consult with the wheel manufacturer to determine the appropriate torque spec.
Why is following the correct torque spec important?
As we mentioned earlier, following the correct torque spec is critical for ensuring the safety and longevity of your car. Over-tightening your lug nuts can lead to warped brake rotors, damaged wheel studs, and even a cracked wheel.
Under-tightening can cause your wheels to become loose while you’re driving, which can be incredibly dangerous.
By following the recommended torque spec, you can avoid these issues and keep your Civic running smoothly for years to come.
How do I properly torque my Civic’s wheel lugs?
Now that you know the importance of following the correct torque spec, let’s talk about how to properly torque your Civic’s wheel lugs. Here’s a step-by-step guide:
Get a torque wrench:
You’ll need a torque wrench to properly torque your lug nuts. You can find
Check the manufacturer’s recommended torque spec:
As we mentioned earlier, the recommended torque for Honda Civic wheel lugs is 80-100 lb-ft. However, it’s always a good idea to double-check your owner’s manual or the manufacturer’s website to confirm the exact torque spec for your specific make and model.
Remove the wheel cover or hubcap:
If your Civic has a wheel cover or hubcap, remove it to access the lug nuts.
Loosen the lug nuts: Use a lug wrench to loosen the lug nuts on the wheel you’re working on. Only loosen them enough to break the initial resistance – you don’t want to completely remove them yet.
Jack up the car:
Use a car jack to lift the car off the ground, making sure to place it on a secure and level surface.
Remove the lug nuts and wheel:
Once the car is lifted, remove the lug nuts and wheel from the car.
Clean the hub and wheel:
Use a wire brush or a clean cloth to remove any dirt or debris from the hub and wheel.
Install the wheel and lug nuts:
Place the wheel back onto the hub, lining up the bolt holes. Thread the lug nuts onto the bolts by hand.
Torque the lug nuts:
Use your torque wrench to tighten the lug nuts to the recommended torque spec (in this case, 80-100 lb-ft). Start with the lug nut closest to the top of the wheel, and tighten each lug nut in a star pattern. This ensures that the wheel is evenly seated on the hub and minimizes the risk of warping or damage.
Lower the car:
Once the lug nuts are properly torqued, lower the car back down to the ground.
Double-check the torque:
After you’ve lowered the car, double-check the torque on each lug nut to ensure that they’re all tightened to the correct spec.
Source: Honda forum
